![[personal profile]](https://www.dreamwidth.org/img/silk/identity/user.png){kind=small}
Corrections have been made to the drawing of the Third Temple. I wrote about this in the previous post.
The 3D model of Ezekiel's Temple is corrected according to the drawing.
The 3D model of Ezekiel's Temple is corrected according to the drawing.
The change refers to the interpretation of certain sizes of gates set in the prophecy of Ezekiel. The reason for revising the model was the unsatisfactory appearance of the front facade of the outer gates of the temple complex.
And he measured the width of the gateway, ten cubits, and the length of the gate, thirteen cubits. (Ezekiel 40:11)
So, length is length, and it can not be interpreted as the width of the space inside the pillars. Thus, the width of the space behind the pillars is equal to the width of the passage (10 cubits) plus the width of the pillars (2 + 2 cubits). Pillars do not go into the wall.
Pillars should not cover the front surface of the "threshold" of the gate, otherwise this "threshold" could not be measured in the sight of Ezekiel. The only acceptable position of the posts in relation to the wall of the gate is the position of the corner to the corner.
He made the side pillars sixty cubits high; the gate extended round about to the side pillar of the courtyard. (Ezekiel 40:14 – NASB)
He made also posts of threescore cubits, even unto the post of the court round about the gate. (Ezekiel 40:14 – KJV)
Interpretation of the 14th verse has not changed: in the original there is no word "height", this is the measurement of the distance between the outer and inner doors of the gate. In addition, there are 2 more options for interpreting the length of 60 cubits: as the length between the front and back pairs of pillars on which the doors hang, or as the full length that all the pillars in the gate occupy.
( Read more... )
And he measured the width of the gateway, ten cubits, and the length of the gate, thirteen cubits. (Ezekiel 40:11)
So, length is length, and it can not be interpreted as the width of the space inside the pillars. Thus, the width of the space behind the pillars is equal to the width of the passage (10 cubits) plus the width of the pillars (2 + 2 cubits). Pillars do not go into the wall.
Pillars should not cover the front surface of the "threshold" of the gate, otherwise this "threshold" could not be measured in the sight of Ezekiel. The only acceptable position of the posts in relation to the wall of the gate is the position of the corner to the corner.
He made the side pillars sixty cubits high; the gate extended round about to the side pillar of the courtyard. (Ezekiel 40:14 – NASB)
He made also posts of threescore cubits, even unto the post of the court round about the gate. (Ezekiel 40:14 – KJV)
Interpretation of the 14th verse has not changed: in the original there is no word "height", this is the measurement of the distance between the outer and inner doors of the gate. In addition, there are 2 more options for interpreting the length of 60 cubits: as the length between the front and back pairs of pillars on which the doors hang, or as the full length that all the pillars in the gate occupy.
( Read more... )
Drawing of the altar of Ezekiel's Temple
Mar. 1st, 2018 07:28 pmMaybe someone prefers to see the blueprints, not the 3D model.
The fact that the total dimensions of the altar and the total dimensions of the area around the altar turned out to be a multiple of the size of the measuring reed – this is an additional confirmation of the correctness of our constructions.
The metal corner along the perimeter of the base of the altar and around the perimeter of the area around the altar can be made of titanium.
The fact that the total dimensions of the altar and the total dimensions of the area around the altar turned out to be a multiple of the size of the measuring reed – this is an additional confirmation of the correctness of our constructions.
The metal corner along the perimeter of the base of the altar and around the perimeter of the area around the altar can be made of titanium.
Ezekiel's Temple, diagram with dimensions
Feb. 15th, 2018 03:13 pmThe temple of Yahweh, also called the Third Temple or Ezekiel's Temple.
Now in the temple complex there are baptisteries, and I had to draw a new scheme of Ezekiel's Temple. The same diagram of Ezekiel's Temple in higher resolution.
Now in the temple complex there are baptisteries, and I had to draw a new scheme of Ezekiel's Temple. The same diagram of Ezekiel's Temple in higher resolution.
I made the necessary corrections to the diagram of Ezekiel's Temple.
Two pairs of internal doors can not be opened at the same time.
Two pairs of internal doors can not be opened at the same time.
Drawing of Ezekiel's Temple
Feb. 6th, 2018 03:17 amSome additions to the drawing of the Third Temple. About the Baptisteries in the Third Temple.
Drawing of the temple complex of the Third Temple in accordance with the prophecy of Ezekiel.
So, the prophecy of Ezekiel materializes before our eyes. Nobody is surprised by this?
Drawing of the temple complex of the Third Temple in accordance with the prophecy of Ezekiel.
So, the prophecy of Ezekiel materializes before our eyes. Nobody is surprised by this?
I tried to make the drawing a little more accurate. In 3D model of the Temple, I also found small errors and shortcomings, and soon I will try to update all versions of 3D model of Ezekiel's Temple. It may take some time, because I have a very slow internet.
Drawing of the temple complex of the Third Temple in accordance with the prophecy of Ezekiel. Under the link – a picture in higher resolution.
All dimensions are given in cubits. 1 cubit = 480 mm. * – the size is not specified in the prophecy of Ezekiel.
Drawing of the temple complex of the Third Temple in accordance with the prophecy of Ezekiel. Under the link – a picture in higher resolution.
All dimensions are given in cubits. 1 cubit = 480 mm. * – the size is not specified in the prophecy of Ezekiel.
All the time you have to make corrections.
Drawing of Ezekiel's Temple.
Correction was made: the corners were cut off at the eastern wall of the courtyard, the length of the 24 cubits cut along the axis of the fence posts (not shown in the drawing). 6 sections of the fence, each 4 cubits long (1920 mm) will go at an angle of 45 degrees on both corners of the wall. In the liberated space there will be 12 drinking fountains: 6 along the wall and 6 in the area of the triangle, total 24 drinking fountains at both cut corners.
Drawing of Ezekiel's Temple.
Correction was made: the corners were cut off at the eastern wall of the courtyard, the length of the 24 cubits cut along the axis of the fence posts (not shown in the drawing). 6 sections of the fence, each 4 cubits long (1920 mm) will go at an angle of 45 degrees on both corners of the wall. In the liberated space there will be 12 drinking fountains: 6 along the wall and 6 in the area of the triangle, total 24 drinking fountains at both cut corners.
A slightly corrected drawing of Ezekiel's Temple.
Any changes in the current project of the Third Temple cause fierce controversy among our architects. By publishing the next version of the Third Temple in accordance with the prophecy of Ezekiel, I want to hope that this option will be final.
The general drawing of the temple complex of the Third Temple.
The general drawing of the temple complex of the Third Temple.
![[community profile]](https://www.dreamwidth.org/img/silk/identity/community.png){kind=small}